Using the CAMCORDER - Basic Recording
ENGLISH
5454
✤You can monitor the playback picture on the LCD monitor.
✤Make sure that the battery pack is in place.
1. Set the device to CAMCORDER and the Power Switch to PLAYmode.
2. Insert the tape you wish to view. (See page 49)
3. Open the LCD screen.
Adjust the angle of the LCD screen and set the brightness or color if necessary.
4. Press the (REW) button to rewind the tape to the starting point.
■
To stop rewinding, press the (STOP) button.
■
The camcorder stops automatically after rewinding is complete.
5. Press the (PLAY/STILL) button to start the playback.
■
You can view the pictures you recorded on the LCD.
■
To stop the PLAYoperation, press the (STOP) button.
Notes
■
You can also view the picture on a TV screen, after connecting the camcorder to a TV or VCR. (See page 77)
■
Various functions are available in Playback mode. (See page 79)
Playing Back a Tape You Have Recorded on the LCD
FADE
S.SHOW
BLC
REV FWD
T
APE
MEMORY
DELETE
REC
PLAY
FADE
S.SHOW
BLC
REV FWD
T
APE
MEMORY
PLA
Y
REC
OFF
124
00655B SCD5000 (034~069) 6/11/03 2:19 PM Page 54