Samsung SCH-a610 manual Data, 134, Auto Detect, Baud Rate

Service LED

You can turn the Service LED on the front of your phone on or off. The Service LED notifies you of the charge status, incoming calls, and more.

Data

Use the Data sub menu to set the Auto Detect feature for when you receive data and to set the Data Baud Rate.

1.In standby mode, press the left soft key ( ) Menu,

then press , , for Data. The sub menus listed in the following table appear in the display.

Sub menu	Function
1 Auto Detect	Set your phone’s data auto detect capabilities.
	Options are data off, data for next call, and data
	until powered off.
2 Baud Rate	Set the baud rate for data connections. Options
	are Auto, 19200, 38400, 57600, 115200,
	and 230400.

2.Use the navigation key to highlight the Data sub menu of your choice, then press .

3.Use the navigation key to highlight the desired Auto Detect or Baud Rate settings, then press .

1.In standby mode, press the left soft key ( ) Menu,

then press , , for Service LED. Off and On appear in the display.

2.Use the navigation key to highlight Off or On, then press

. Your selection is saved.

134