Section 6: Contacts 67
Understanding Your Contacts
Section 6
Note: If you tapped Hide, you can display the phone main screen by
tapping the signal strength icon in the top right of the screen.
Beam a Contact via IR
Your i730 is equipped with an infrared port (IR) which
allows you to send and receive information wirelessly
between two IR Pocket PC devices. To beam a contact:
1. Press the right soft key Contacts.
2. Use the up/down navigation key to highlight the desired
contact and press . The summary screen appears
in the display.
3. Press the right soft key Menu, use the up/down
navigation key to highlight Beam Contact.
4. Align the ports between the two devices and press
.
5. When the contact has been successfully transferred, tap
to exit.
Beam Contacts via IR without Confirmation
You can send and receive many contacts via IR without a
confirmation message. To beam many contacts at once,
follow these steps:
1. For the device that will receive the contacts, tap Start
and then select Settings.
2. Tap Connections and select Beam.
3. Tap Receive an infrared beam, which sets the device to
Beam Receive mode.