Operating Your Camera
5)Enter a title, move the cursor to ‘POS’ and press the Function Setup switch. The entered title appears on the screen. Select the position to display the title on the screen by using the Function Setup switch and press the Function Setup switch. When the position is determined, select ‘END’ and press the Function Setup switch to return to the SPECIAL menu.
FRONT DOOR |
Notes |
•When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.
•Only English is available in this mode.
•If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the Function Setup switch.
SYNC : In areas where the supply is at 60Hz(NTSC),
50Hz(PAL) frequency, you can synchronize the output phase of multiple cameras using the power synchronization function
INT : Internal Synchronization Type
L/L : Power Synchronization Type,
❶Press the Function Setup switch.
❷You can select a desired phase from 0 to 359 when select 'phase'.
Notes
•When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type synchronization.
•When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
COLOR DOME CAMERA 34
