Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician. Nothing appears on the screen.
Check that the power cord and line connection between the camera and monitor are properly connected.
Check that you have properly connected BNC cable to the camera.
The image on the screen is dim.
Is lens stained with dirt? Clean your lens with soft, clean cloth. Set the monitor or DVR to the proper condition.
If the camera is exposed to very strong light, change the camera position.
The image on the screen is dark.
Adjust the contrast feature of the monitor or DVR.
If you have an intermediate device, set the 75Ω /
The camera is not working properly, and the surface of the camera is hot.
Check that you have properly connected the camera to an appropriate power source.
The DAY/NIGHT menu does not work.
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
The
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
Color is not correct.
Check the setting of WHITE BAL SETUP menu .
The screen flickers continually.
Ensure the camera is not pointing towards the sun.
When coaxial communication is not available:
Make sure that the camera and monitor are installed within the recommended distance.
Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded.
The camera is out of focus.
Check that you have properly adjusted the zoom / focus adjustment lever of lens.
E
I
P
V
I
T
E
S
S
F
H
M
S
V
L
Z
F
A
P
P
O
E
O
S
B
D
G
W
S
M
P
3 D D C S F C E O S M W D
ö
COLOR DOME CAMERA 38
