Samsung SDC-415 instruction manual Connecting to a monitor, Connecting to power

Installation

■Connecting to a monitor

Please connect the video output terminal located on the back of the camera to the monitor.

CCD Camera Monitor

•The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument.

•Please turn off the power when connecting.

•Please select Hi-Z on the 75Ω /Hi-Z switch for the intermediate video TV set and select 75Ω for the Intermediate device as shown in the picture below.

CCD Camera

Intermediate End monitor

■Connecting to power

Each model has a different power input specification.

Please check the model type and standard power requirement before connecting to power.

AC Power Type (AC 24V, 500mA)

DC Power Type (DC 12V, 500mA)

The recommended adaptor specification for SDC-415NA/ SDC-415PA is AC 24V, 500mA and the recommended adaptor specification for SDC-415ND/ SDC- 415PD is DC 12V, 500mA.

An adaptor that meets the standard requirement must be used.

When the resistance value of copper wire is at [20°C(68°F)]

Copper wire size(AWG)	#24(0.22mm2)	#22(0.33mm2) #20(0.52mm2)		#18(0.83mm2)
Resistance value(Ω /m)	0.078	0.050	0.030	0.018
Voltage drop(V/m)	0.028	0.018	0.011	0.006

•As shown in the table above, voltage decreases as the wire gets longer.

Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.

Standard voltage for camera operation : DC 12V±10%

There may be some deviation in voltage drop depending on the type of wire and the manufacturer.

COLOR CCD CAMERA 18 User’s Manual COLOR CCD CAMERA 19 User’s Manual