To initialize the scanner’s memory, turn off the scanner. Then, press 2, 9, and Hold while turning it on.
Using the PC Control and
Cloning Options
Use the included connection cable to connect your scanner to another BC246T scanner or your personal computer.
Menu
Xfer Information | E |
•PC Control Lets you set the baud rate your scanner uses to communicate with a personal computer. See “Connecting Your Scanner to a Personal Computer”.
•Clone Lets you set your scanner as a master or a slave, letting you transfer programming to or from another BC246T scanner. See “Cloning the Scanner” on Page 51.
Connecting Your
Scanner to a
Personal Computer
To connect your scanner to a
personal computer, you must first set the scanner’s baud rate
(the rate at which data is transferred between the scanner and the computer, in
bits per second (bps)).
Hint: If you have trouble
transferring data between your scanner and your computer, try setting the baud rate to a slower setting.
| Xfer Information | E |
Menu |
PC Control E
•Off The baud rate is not set.
•9600 bps The baud rate is set to 9600 bps.
Other Settings
50
