Uniden BC246T owner manual Setting System Frequencies, Entering/Editing Motorola Channel Groups

•See “Reviewing Locked Out Frequencies” on Page 89

•See “Setting System Attenuation (Trunked Systems Only)” on Page 70

•See “Deleting Systems” on Page 71

•See “Copying Systems” on Page 71

•See “Setting System Frequencies” on Page 56

•See “Entering/Editing Motorola Channel Groups” on Page 56

Setting System Frequencies

SET FREQUENCIES	E
New FREQUENCY	E

Input a system frequency, then press E.

To enter additional frequencies, press Menu , use the scroll control to select New Frequency, then repeat the above.

Note: If you select Control Channel Only mode (see “Set- ting Control-Channel Only (Motorola Systems Only)” on Page 70), you only need to enter the frequency(s) that can be assigned as the control channel. Most frequency lists usually indicate which of the frequencies are the control channel frequencies. Otherwise, you must enter all of the frequencies.

Entering/Editing

Motorola Channel Groups

To enter channels in a system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).

Setting Up a Channel Group

Edit Group E New Group E

The scanner creates a group with a default name of Group nn. nn increments by one for each new group you create within a system.

Programming Radio Systems

56