Note: This feature does not operate when the scanner is in AM modulation mode.
Screening Out Paging Systems
|
|
| Srch/CloCall Opt | E |
| Menu | |||
Pager Screen | E |
| ||
This setting determines whether the scanner automatically ignores transmissions found during searching or Close Call operation that are on common paging system frequencies.
On The scanner skips known paging system frequencies.
Off The scanner stops on any detected transmission, including paging systems.
Notes:
•The default setting for this feature is On.
•The frequencies include paging systems and also the NOAA weather frequencies.
•Even with the feature on, you might hear some paging systems. Some frequencies are shared between business radio systems and paging systems. If the scanner stops on a paging system even with this feature turned on, manually lock it out by pressing L/O.
Finding Repeater Output Frequencies
|
|
| Srch/CloCall Opt | E |
| Menu | |||
Repeater Find | E |
| ||
This feature sets whether the scanner tries to tune to a repeater output frequency during Close Call operation when it detects a transmission on a repeater input frequency. Since you can normally only hear one side of a conversation when you listen to an input frequency transmission, turning this feature on can let you hear both sides of the conversation.
Search and Close Call Options
90
