Uniden BC246T owner manual Setting I-Call Motorola and EDACS Systems Only

Motorola systems use talk group ID's in multiples of 16. ID numbers that fall between these ID's indicate special status flags for the system. This setting determines how the scanner will handle ID's that are not multiples of 16. Select your setting then press E.

Ignore - the scanner rounds all received ID's down to the next interval of 16.

Yes - the scanner treats all received ID's as unique ID's.

Note: The default setting is Ignore.

Setting the End Code Operation (Motorola Systems Only)

Menu

program system E

Select the system		E
Edit Sys Option		E
Set End Code	E

This setting determines how the scanner handles the transmission end code sent by most Motorola systems. Select your setting then press E.

Yes - the scanner immediately returns to the control channel when it detects the end code.

Ignore - the scanner does not return to the control channel until the carrier drops.

Note: The default setting is Yes.

Setting I-Call

(Motorola and EDACS Systems Only)

Menu

program system E

Select the system			E
Edit	Sys Option		E
Set	I CALL	E

This setting determines how your scanner treats I-calls while ID Searching.

Programming/Editing Optional Settings

68