Scanner won’t | No ID’s have been | Program one or more |
stop scanning | programmed. | ID’s or use the ID |
a trunked |
| Search mode. |
system. |
|
|
| The ID’s you have | Wait for the ID’s to |
| stored are not | become active or |
| active. | scan another system. |
Scanner won’t | The squelch might | Adjust the squelch |
acquire the | need to be | threshold. See |
data channel. | adjusted. | “Turning On the |
|
| Scanner and Setting |
|
| the Squelch” on |
|
| Page 41. |
| The frequency | Check your |
| used for the data | frequency list for the |
| channel might be | data channel. |
| missing. |
|
Missing replies | The scanner might | Change to a Type 1 |
to | need to be | scanner setup. See |
conversations. | changed to a Type | “Programming |
| 1 scanner setup. | Motorola Systems” |
|
| on Page 54. |
| The fleet map | Try another preset |
| might be incorrect. | fleet map or program |
|
| your own fleet map. |
| One or more of | Make sure all the |
| the system’s | system’s frequencies |
| frequencies might | have been entered. |
| not be entered. |
|
| The system you | Set the scanner to |
| are trying to scan | scan LTR or EDACS |
| might be LTR or | systems. Review |
| EDACS. | “Programming LTR |
|
| Systems” on Page 60 |
|
| and “Programming |
|
| EDACS Systems” on |
|
| Page 58. |
If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write the Uniden Parts and Service Division.
The address and phone number are listed in the Warranty at the end of this manual. If you would like immediate assistance, please call Customer Service at
(800)
If you have Internet access, you can visit http://www.uniden.com for additional information.
Troubleshooting
101