Uniden BC246T Setting Data Skip Conventional Systems Only, Programming/Editing Optional Settings

ID Search - the scanner stops on any transmission for unlocked talk group ID's.

Note: You can also change this setting by pressing Scan while scanning the system.

Setting the Base Frequency/Step/Offset (Motorola UHF/VHF Systems Only)

Menu

program system E

Select the system				E
Edit	Sys	Option		E
Edit	Band	Plan		E
Select Plan			Select a band plan (1, 2, or 3)		E
Input Base Freq				Input the base frequency	E

Select Step (5 kHz, 12.5 kHz, 25.0 kHz, 37.5 kHz, 50.0

kHz, 62,5 kHz, 75.0	kHz, 87.5 Khz, or 100.0	kHz)	E
Offset (380-759)	Input the offset	E

This setting lets you enter the base frequency, step, and offset for the band plan you select. This information lets you set the scanner so it will scan a Motorola UHF/VHF system.

Setting Data Skip (Conventional Systems Only)

Menu

program system E

Select the system			E
Edit	Sys	Option	E
Set	DATA	SKIP	E

This setting controls how the scanner behaves when it stops on a channel that has a data signal.

On - the scanner stops briefly on the channel, but then immediately resumes scanning automatically. Press E to select.

Off - the scanner remains on the channel until the transmission stops. Press E to select.

Programming/Editing Optional Settings

66