Setting Up a Channel Group
EDIT GROUP E
NEW GROUP E
The scanner creates a group with a default name of GROUP nn. nn increments by one for each new group you create within a system.
Next, refer to the appropriate section to set
•See “Entering/Editing the Group Name” on Page 71
•See “Setting the Group Quick Key” on Page 72
•See “Setting Group Lockout” on Page 72
•See “Deleting Groups” on Page 73
•See “Entering/Editing LTR Channels/ Talkgroups” on Page 62
Entering/Editing LTR Channels/ Talkgroups
Edit Channel | E |
NEW Channel E | Input TGID |
Enter the talk group ID for the channel, then press E. Note: Press to enter a hyphen.
Then, refer to the appropriate section to change a channel setting:
•See “Editing the Channel Name” on Page 73
•See “Setting Channel Alert” on Page 75
•See “Setting Channel Lockout” on Page 78
•See “Deleting Channels” on Page 78
•See “Copying/Pasting Channels” on Page 79
To program another channel within the same group, press Menu , then repeat the above.
To create another channel group and enter more channels, press Menu four times, then proceed from “Set- ting Up a Channel Group” on Page 62.
To
Programming Radio Systems
62