Note: The default setting is AUTO.
Setting Channel Attenuation (Conventional Channels Only)
Menu
program system | E |
Select the system | E | |
Edit Group | E |
|
Select the group |
| E |
Edit Channel | E |
|
Select the channel | E | |
Set Attenuator |
| E |
This setting controls whether the scanner attenuates signals on this channel. Select your setting, then press E.
On - the channel is attenuated by about 18 dB.
Off - the channel is not attenuated.
Notes:
•The default setting is Off.
•For trunked systems, the attenuation is a system- level setting.
•You can also toggle this setting by holding on the channel and pressing Func and E.
Setting the Frequency Step (Conventional Channels Only)
|
| program system | E | ||
| Menu | ||||
Select the system | E |
| |||
Edit | Group | E |
|
| |
Select the group | E |
| |||
Edit | Channel | E |
|
| |
Select the channel | E |
| |||
Set Step | E |
|
|
Programming/Editing Optional Settings
77