Uniden BC246T owner manual Entering/Editing Motorola Channels, Edit Channel New

Next, refer to the appropriate section to set group-wide options:

•See “Entering/Editing the Group Name” on Page 71

•See “Setting the Group Quick Key” on Page 72

•See “Deleting Groups” on Page 73

•See “Copying Systems” on Page 71

•See “Entering/Editing Motorola Channels” on

Page 57

•See “Setting I-Call (Motorola and EDACS Systems Only)” on Page 68

Entering/Editing Motorola Channels

Edit	Channel	E
New	Channel	E	Input TGID

Enter the Talk Group ID for the channel, then press E. Notes:

•Motorola Type 2 Talk Group ID's are entered as 5-digit numbers.

•Motorola Type I Talk Group ID's are entered as two numbers separated by a hyphen. Use the decimal point to enter the hyphen.

•To enter an I-Call ID, press , then enter the ID. The appears as an i when entering the ID, but it

appears as a seven ( 7) when it is active on a Type 2 system.

Then, refer to the appropriate section to change a channel setting:

•See “Setting Emergency Alert (Motorola and EDACS Systems Only)” on Page 69

•See “Editing the Channel Name” on Page 73

•See “Setting Channel Alert” on Page 75

•See “Setting Channel Lockout” on Page 78

•See “Deleting Channels” on Page 78

•See “Copying/Pasting Channels” on Page 79

Programming Radio Systems

57