Notes:
•If you select 0, the scanner stays on the system for a minimal time (only long enough to check current system activity).
•The default setting is 2 seconds for each system.
•For conventional systems, all unlocked channels will be scanned at least once regardless of this setting.
•The scanner moves to the next system after the hold time expires, any current transmission ends, and the channel delay time expires.
Setting the Channel Delay Time
Menu
program system | E |
Select the system | E | |
Edit | Sys Option | E |
Set | DELAY Time | E |
This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. Enter a value from
Notes:
•The default setting is 2 seconds for each system.
•This setting applies to all channels within the system.
Setting ID Scan/Search
(Trunked Systems Only)
Menu
program system | E |
Select the system | E |
Edit Sys Option | E |
ID SCAN/SEARCH | E |
This setting controls how the system will be scanned. Select your setting, then press E.
ID Scan - the scanner only stops on channels you have programmed into the system.
Programming/Editing Optional Settings
65