Connecting the Signal Source
This section describes connecting the signal source for TV.
Connect the signal source for the TV by using the TV (in) coaxial connector or the S-VID IN (S-video) connector:
■Plug the connector of a coaxial cable from your TV antenna or from your TV cable (wall or set-top box) into the TV/RF-IN (D) connector on the back of the PC, and then turn the connector to tighten it.
Or
■Plug a cable into the S-VID IN (C) connector on the back of the PC; use an S-video cable (not provided) or use the S-video to composite video adapter cable and the composite video cable. Plug the other end of the cable into your set-top box, VCR, or other device that is providing the signal source for the TV.
You can also plug audio cables (not provided) from your set-top box or VCR into the Audio in right (red) (A) connector and the Audio in left (white) (B) connector on the back of the PC.
A B C D E
Connecting the FM Radio Antenna
(Select Models Only)
1 Plug the FM radio antenna cable into the FM-IN (E) port on the back of the PC. The FM connector is found on the TV tuner card.
2 You may want to extend the ends of the cable to improve your FM radio signal reception.
18 HP Media Center PC User’s Guide