| Installing a New Optical Drive | ||||
| 1 Make sure the jumper on the new drive is in | ||||
| the CS (Cable Select) position. Slide the new | ||||
n | |||||
optical drive through the front of the computer. | |||||
Don’t slide the drive in all the way — you | |||||
need room to attach the cables. | |||||
A jumper is a small | (The illustration below is an example drive | ||||
plastic connector or | |||||
with Cable Select jumper installed. Your drive | |||||
wire which | |||||
may vary.) | |||||
electrically connects | |||||
|
|
|
| ||
two pins in order to | 2 Connect the cables to the back of the drive. | ||||
define a configuration | |||||
setting. |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
CS SL MA
3 Push the drive all the way in, align the screw holes, and insert the screws.
4 Replace the fan duct. See “Replacing the Front Panel” on page 185.
5 Replace the front panel. See “Replacing the Front Panel” on page 185.
6 Replace the side panels. See “Replacing the Side Panels” on page 183.
188 hp media center pc user’s guide