Wall to Cable TV Set-top Box or Satellite Box to VCR to TV Using Coaxial Cable

Remove the coaxial cable at the input to the VCR, and connect it to the input of a coaxial cable signal splitter (not included; available at electronics stores). Connect two coaxial cables to the splitter outputs. Connect one of these cables to the input of the VCR and the other one to the TV connector on the back of the PC. Be sure to connect the remote sensor control cable (emitter) and position it on your set-top box or satellite box. This allows the PC to change the channel on the box. See “Connecting the Remote Sensor” on page 17.

Not shown in diagram: To view your images from your TV, use an S-video In or a composite video In cable to connect the TV to the PC. To view your images from your monitor, use a monitor cable to connect the fast forward to the PC.

22 hp media center pc user’s guide