ProblemSolution
My remote sensor If a faint red light doesn’t appear when you point the remote control at
is not receiving a the remote sensor, try the following: signal from the
remote control.1 Click Start,
2 Click the Hardware tab, and then click Device Manager.
3 Click the plus (+) sign next to Universal Serial Bus Controllers.
4 If the eHome Infrared Receiver is listed under Universal Serial Bus controllers, Windows is properly detecting the IR receiver. If it is not listed, go to the next step.
5 Unplug the end of the USB cable on the remote sensor from the PC and plug it into the same USB port.
6 Plug the end of the USB cable on the remote sensor into the front USB port on the PC.
7 Disconnect all other USB devices, leave the remote sensor plugged
in, and then restart the PC. Plug in other USB devices after the remote sensor appears in device manager.
I cannot remove | You cannot remove a CD or DVD after you have turned off the computer. |
a CD or DVD. | Turn on the computer and press the Eject button to extend the tray. |
Troubleshooting 215