7 Press the On button on the front of the chassis to turn on the PC.

8 Turn on your analog home video source device.

9 Click Start, choose All Programs, Video, ArcSoft ShowBiz 2, and then click ShowBiz.

10 Click the Capture button in the ShowBiz window.

11 In the ShowBiz capture window, click the Device drop-down list and select the source for video; choose based on your card type:

■Conexant 2388x Video Capture

Or

■Hauppauge WinTV PVR PCI II

12 Select the same item from the Audio drop- down list; choose:

■Conexant 2388x Video Capture

Or

■Hauppauge WinTV PVR PCI II

13 Click the Video Input button, and click a selection based on the cable connection you made in step 3:

■Video SVideo_2

■Video Composite_2

■TV Tuner — for the rear coaxial cable connector

14 Click the Audio Input button and click a selection based on the cable connection you made in step 6:

■Tuner In — for the rear coaxial cable connector

■Line In_2 — for the front audio in connectors

15 Press the play button or otherwise start your VCR or camcorder.

16 In the ShowBiz capture window, click the red dot (record) button and type the file name for the video. To capture the video from the beginning, rewind your VCR or camcorder and begin play again.

17 Click the square (stop) button to stop capturing video. Your file is stored in the My Videos folder with the file name you typed in step 15.

With the video file, you can:

■Edit the video file and store it on DVD by using ArcSoft ShowBiz.

■View your video file using Media Center (copy or move the video file into the Shared Video folder to allow all users on the PC to view it).

18 When you are finished capturing video, follow the steps in the next procedure to disconnect your device and return to the original signal source setup.

178 hp media center pc user’s guide