Samsung SGH-A687LBAATT user manual The WAP settings may vary depending on the service provider

•Protocol: set the connection protocol used by the WAP browser: WAP or HTTP.

•Home URL: enter the URL address of the page to use as your homepage.

•Gateway Address: (WAP only) enter the gateway address of the proxy server.

•Proxy Address: (HTTP only) set the proxy server address and port.

•Secure Connection: (WAP only) determines if the connection will follow a secure protocol.

•Linger Time (sec.): set a time period (in seconds) after which the network is disconnected if there has been no new data traffic in that time.

•Advanced Settings: allows you to configure some of the IP-specific information.

–Static IP: specify if you want to manually enter an IP address. Remove the check mark if you want the server to automatically assign the IP address.

–Local Phone IP: enter the IP address obtained from the network operator, if you checked the Static IP option.

–Static DNS: specify if you want to manually enter the Domain Name Server (DNS) address. Remove the check mark if you want the server to automatically assign the IP address.

–Server 1/Server 2: enter the Domain Name Server (DNS) addresses.

–Traffic Class: select the traffic class.

4.Press OK to exit Advanced Settings.

5.Press Save to save these settings.

The WAP settings may vary depending on the service provider.

108