Samsung SGH-A687LBAATT Network Profile Configuration, Configuring your Network Profiles

Network Profile Configuration

Configuring your Network Profiles

Your phone is wirelessly connecting to the Internet via a built in WAP browser. Connection is made via one of the available WAP browsers: MEdia Net and AT&T MMS (MultiMedia Server). You need these settings to use the web browser or send MMS messages or e-mails.

Use this menu to create and customize the profiles containing the settings for connecting your phone to the network. Although you can change the active connection, please ask your local retailer or customer service representative to assist.

1.In Idle mode, press Menu ➔ Settings ➔ Connectivity

➔ Network Profiles.

2.Highlight one of the following options and press the View soft key.

• MEdia Net

• AT&T MMS

• AT&T IMS

Note: MEdia Net, AT&T MMS, and AT&T IMS are pre-configured and cannot be altered on this screen. Your phone is set up by default for connecting to the network.

– or –

Press Options ➔ New, and press the Select soft key or

the key to create a new connection.

3.Select one of the following parameters to edit. They may or may not appear depending on the Network Profile that was selected:

•Set Name: enter a profile name.

•Access Name: edit the access point name.

•Auth Type: select the type of authentication used for this WAP

connection: None, Normal, or Secure.

•User ID: enter the User ID required to connect to the network.

•Password: enter the user password required to connect to the network.

•Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or Other.

•Home URL: enter the URL address of the page to use as your homepage.

•Proxy Address: MEdia Net set as the proxy server address

and port. This option only appears when the Protocol is set to HTTP.

•Gateway Address: Enter the Gateway Address. This option only appears when the Protocol is set to WAP.

Changing Your Settings 47