Samsung SGH-A687ZPAATT Network Profiles, MEdia Net, Connection None, Normal, or Secure

➔ Network Profiles.

2.Highlight one of the following options and press the View soft key.

• MEdia Net

• AT&T MMS

• AT&T IMS

Note: MEdia Net, AT&T MMS, and AT&T IMS are pre-configured and cannot be altered on this screen. Your phone is set up by default for connecting to the network.

– or –

Press Options ➔ New, and press the Select soft key or

the key to create a new connection.

3.Select one of the following parameters to edit. They may or may not appear depending on the Network Profile that was selected:

•Set Name: enter a profile name.

•Access Name: edit the access point name.

•Auth Type: select the type of authentication used for this WAP

connection: None, Normal, or Secure.

•User ID: enter the User ID required to connect to the network.

•Password: enter the user password required to connect to the network.

•Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or Other.

•Home URL: enter the URL address of the page to use as your homepage.

•Proxy Address: MEdia Net set as the proxy server address

and port. This option only appears when the Protocol is set to HTTP.

•Gateway Address: Enter the Gateway Address. This option only appears when the Protocol is set to WAP.

•Secure Connection: Select On or Off depending on whether or not you have a secure connection. This option only appears when the Protocol is set to WAP.

•Linger Time (sec.): set a time period (in seconds) after which the network is disconnected if there is no new data traffic.

•Advanced Settings: allows you to configure some of the

IP-specific information: Static IP, Static DNS, Server information, and Traffic Class. Highlight this option and press the Edit soft key to access the following options:

–Static IP: specify if you want to manually enter an IP address. Remove the check mark if you want the server to automatically assign the IP address.

–Local Phone IP: allows you to configure the local phone IP address.

–Static DNS: specify if you want to manually enter the Domain Name Server (DNS) address. Remove the check mark if you want the server to automatically assign the address.

Changing Your Settings 43