Protocol: set the connection protocol used by the WAP browser: WAP or HTTP.

Home URL: enter the URL address of the page to use as your homepage.

Gateway Address: (WAP only) enter the gateway address of the proxy server.

Proxy Address: (HTTP only) set the proxy server address and port.

Secure Connection: (WAP only) determines if the connection will follow a secure protocol.

Linger Time (sec.): set a time period (in seconds) after which the network is disconnected if there has been no new data traffic in that time.

Advanced Settings: allows you to configure some of the IP-specific information.

Static IP: specify if you want to manually enter an IP address. Remove the check mark if you want the server to automatically assign the IP address.

Local Phone IP: enter the IP address obtained from the network operator, if you checked the Static IP option.

Static DNS: specify if you want to manually enter the Domain Name Server (DNS) address. Remove the check mark if you want the server to automatically assign the IP address.

Server 1/Server 2: enter the Domain Name Server (DNS) addresses.

Traffic Class: select the traffic class.

4.Press OK to exit Advanced Settings.

5.Press Save to save these settings.

The WAP settings may vary depending on the service provider.

104

Page 108
Image 108
Samsung SGH-A687ZPAATT user manual WAP settings may vary depending on the service provider 104