Using the Travel Charger

Important! Verify that the handset battery is installed prior to connection. If the battery is not properly installed and the wall charger is connected, the handset may power off and on continuously, preventing proper operation.

Incorrect

Correct

1.Lift up on the plastic protector that covers the port on the bottom of your phone and swing it open (1).

2.Plug the flat end of the Travel Charger into the Power/ Accessory Interface port (2) and the other end into a standard AC wall outlet.

3.When charging is finished, remove the flat end from the interface connector port on the phone.

Warning! Please note that a touch screen responds best to a light touch from the pad of your finger. Using excessive force or a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty. For more information, refer to “Standard Limited Warranty” on page 236.

Note: Failure to unplug the wall charger before you remove the battery, can cause damage to the phone.

Low Battery Indicator

When the battery is weak and only a few minutes of talk time remain, the battery icon () blinks and the device sounds a warning tone at regular intervals. In this condition, your phone conserves its remaining battery power, not by turning off the backlight, but by entering the dimming mode. For a

Getting Started

10

Page 17
Image 17
Samsung SGH-I537_UM user manual Using the Travel Charger, Low Battery Indicator