connectivity
Connect via USB
Set a default action for your USB connection
To set your device to perform a default action when you connect the device to a PC with the PC data cable,
1.In Standby mode, press [] → Connectivity → USB → USB connection mode.
2.Set the default USB mode (PC Studio, Mass storage, Image transfer or Media transfer).
You can also set your device to Ask on connection, instead of using a default USB mode. If you use this setting, your device will prompt you to choose the USB mode every time you connect to a PC.
Use PC Studio
1.Change the USB connection to PC Studio.
2.Connect your device to a PC with the PC data cable.
3.Run PC Studio and manage personal data and media files.
Refer to the PC Studio help for more information.
Copy files to a memory card
1.Insert a memory card into the device.
2.Change the USB connection to Mass storage.
3.Connect your device to a PC with the PC data cable.
4.Select Open folder to view files when a
5.Copy files from the PC to the memory card.
6.When you are finished, disconnect the device from the PC.
56