Samsung SH-S222L/BEBS user manual Disc, Access Time

Category

Select Languages

English

SH-S222A(TS-H662A)

DVD Writer

DVD : DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM, DVD- Video, DVD+R (Dual), DVD-R (Dual), DVD-RAM

DISC

Usable Discs

CD : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G) CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD CD-I, CD-I Bridge (Photo-CD, Video-CD), Multisession CD (Photo-CD, CD-EXTRA, Portforio)

	Disc Diameter
	Interface Port
Interface Support	Burst Transfer
	Rate
ACCESS TIME	CD-ROM
(Random)	DVD-ROM

4.72Inch or 3.15 Inch (120mm or 80mm)

PATA

66.6MB/s (UDMA4)

110ms (Random) 130ms (Random)

Data Transfer Speed

(Max)

Media Type	Write	Read
DVD+R	CAV 22X	CAV 16X
DVD+RW	ZCLV 8X	CAV 12X
DVD+R DUAL	CAV 16X	CAV 12X
DVD-R DUAL	CAV 12X	CAV 12X
DVD-R	CAV 22X	CAV 16X
DVD-RW	CLV 6X	CAV 12X
DVD-ROM(Single)	-	CAV 16X
DVD-ROM(Dual)	-	CAV 12X
DVD-RAM	PCAV 12X	PCAV 12X
CD-ROM	-	CAV 48X
CD-R	PCAV 48X	CAV 40X
US-RW	ZCLV 32X	CAV 40X
HS-RW	CLV 10X	CAV 40X
CD-RW	CLV 4X	CAV 40X

Buffer Memory		2MB
Drive Installation		Horizontal / Vertical
Operating Environment	Temperature	41°F ~ 122°F (5°C ~ 50 °C)
	Humidity	20% ~ 80% (RH)
Size(Width x Height x Length)		5.34 X1.65 X 6.69 Inch (148.2 X 42 X 170mm)
Weight		750g

Note

Do not support DVD-R for Authoring.

Cannot playback or record on both sides of a dual layer disc simultaneously.

The read/write capacity of the supported discs depends on the condition of the disc

and the recording format of the drive. Therefore, the read/write quality may not be perfect. Specifications are subject to change without notice.

FCC information to the user

This equipment has been tested and found to comply with the limits for a class B digital device. pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates.

Uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception Which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures.