a : Master Drive (Select the MA jumper) b : Slave Drive (Select the SL jumper)
c : HDD d : MainBoard
e : Primary 1 f : Secondary 1
Connecting the Jumper to the Master/Slave Port
Connect the jumper to the slot in the back of the DVD Writer.
When you connect the jumper to MA (Master), the drive runs as the master, and when you connect it
to SL (Slave), the drive runs as the slave.
When you connect it to CS (CSEL), you can control the device using the host interface signal CSEL.
(Connection to MA is recommended.)
MA : Master
SL : Slave
CS : Cable Select(CSEL)
페이지 3 / 4SAMSUNG DVD Writer User's Manual
7/2/2008file://C:₩Documents and Settings₩황 정민₩바탕 화면₩유통향 SH-S222A-투루없음_번...