&AUTO

This monitor normally will be in AUTO mode, which means it switches cameras automatically.

Press this button if you want to rescan camera port. This monitor will automatically skip the cameras that are not connected, and the ALARM mode is automatically activated in AUTO mode.

*CAMERA SELECT(C1~C4)

If you want press any camera selector button, this monitor goes into manual mode. Press AUTO button if you want to return to auto mode.

(ALARM/TIME

ALARM : Press this button if you wish to enable or disable an alarm. Initial mode of monitor is alarm enable mode.

(Red LED on : Alarm enabled)

TIME : Sequencing time(1 to 10 seconds) can be adjusted with this knob.

Go on pressing time button and press .

Ex) if you go on pressing time button and press 1S, 2S, 3S, the switching time of screen will be 6 second.

The alarm function does not work for max 1 minute after turning on the camera.

)SCREEN ON/OFF

Turn the monitor screen ON/OFF. Even if the monitor is off, the system still works for recording. Vertical spot line can be shown when turn off this switch.

1 POWER LED

MAIN Power LED.

2SPEAKER

3MICROPHONE

28

Page 29
Image 29
Samsung SSC-12P manual Power LED