Adjust the direction of the lens.

1)Use the cross (+) screw driver to turn the screw (indicated by the arrow in the illustration) counterclockwise slightly. The lens body will move.

2)Tilt the lens body down about 10° from the horizontal, and then turn the screw clockwise to fasten it.

SCREW

Assemble the assy-case front onto the case-rear as shown in the illustration. Fasten the assy-case front to the case-rear with the screw (BH M2.6) you removed earlier.

CASE-REAR

BH M2. 6

ASSY-CASE FRONT

16

Page 17
Image 17
Samsung SSC-12P manual Screw