Samsung SSC-12P manual Case-Rear

●Remove the screw (BH M2. 6) at the bottom of the main unit by turning it counterclockwise, and then lift the assy-case front as you push it upward to detach it from the case-rear.

(✳ Do not apply excessive force, as doing so may damage the inside assembly.)

Assy-case front

BH M2. 6

CASE-REAR

●Place the case-rear over the installation site and mark screw holes with a pencil (indicated by the red circles in the illustration). Drill a pilot hole for each pencil mark (5mm in diameter and at least 35mm in depth), and then fully insert the supplied plastic anchors (HUD 5) into them.

14