Selecting Energy Saving Mode
ENGLISH
You can save energy even during operation in the Cool and Heat mode. In the Cool mode, the temperature will rise and in the Heat mode, the temperature will fall, resulting in saving energy.
1 If necessary, press the 
button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
lt will start up normally after three minutes.
2 Press the | button. |
Result: | ◆ The indoor unit beeps. |
◆The air conditioner runs in the Energy saving mode.
◆The outer air flow blade moves up and down.
◆ To stop the Energy saving mode, press the 
again.
Note You can select the Energy saving mode in the Cool and
Heat mode.
3 To adjust the temperature, press the 
button one or more times until the required temperature is displayed.
4 To select the fan speed, press the | button one or more times until |
the required setting is displayed. |
|
5To control the direction of the air flow, refer to pages 16 and 17.