Quantum Data 700, 701 quick start Running Test Sequence in Burn-In Mode, Using Test Sequences

Using Test Sequences

Running Test Sequence in Burn-In Mode

Select Test > Burn-In > Run to automatically cycle through the test sequence. When the Burn-In mode is stopped, you can use the menu buttons to gate video color information, change sync types, and turn all signal outputs on and off.

NOTE: The Burn-In mode disables the Power-Save feature, if enabled.

Run - Press to run
Burn-in.
Stop - Press to stop
			_Run___Burn-In__OUT*
Red Color			_Red___step#1___DSS*
			_Grn___800_@60__DCS_
Component			_Blu___Focus____ASC
ON/OFF
Green Color
Component ON/OFF	Line 1: Name of Burn-in test currently running.
Blue Color	Line 2: Current step number in cycle
	Line 3: Video format used in current step
Component ON/OFF
	Line 4:	Test image used in current step

OUT - All test signal outputs ON/OFF

DSS - Select Digital

Separate (H&V) Sync

DCS - Select Digital Composite Sync

ASC - Select

Composite Analog

Sync (Composite

Video)

Creating Test Sequence for DDC Displays

If the generator is connected to a VESA DCC-compliant display, press the Learn Monitor, and then Test > DDC Step to setup a test of each format supported by the display.

Press the + button to render the current image with each video format supported by the display.

Press the - button to render all images at the current format.

Select the Run option to automatically test all images for each video format.

When using automatic mode, select Stop to use manual mode.

13