Setting Power Save Preferences
Options Menu
Press the Options button to set
Power Save - Sets Power Saver preference
Pwr Save:On
NTSC_CAL___ Calibrate
Clr_Fmts__ ReloadFmts
Calibrate - Displays calibration menu for setting RGB analog video and sync amplitudes. Appears only if the generator has been configured to allow recalibration.
Reload Fmts - Restores factory default formats
NTSC_CAL - Displays calibration menu for setting peak white signal on the TV output BNC connector
Clr Fmts - Clears all formats from user memory
Setting Power Save Preference
When the Power Save preference is on, and the generator is on battery power, the generator will turn off after 30 minutes of no front panel activity.
If the generator is running a test sequence in
To set the Power Save preference, select Options > Pwr Save.
7
