Quantum Data 700, 701 quick start Special Tests, Using Generator with CS-1 Probe, Testing Audio

Special Tests

Using Generator with CS-1 Probe

The Test > CS1 Probe option uses the Quantum Data CS-1 color sensor to measure the chromaticity and luminance (brightness) of a display. The CS-1 probe connects to the generator’s serial port. Chromaticity is shown as x,y C.I.E. coordinates and the luminance (Y) can be shown either in units of foot-Lamberts or nits. The CS-1 needs to be over a fully lit white area of the display for accurate readings. The Flat_Wht test image is suitable for use with the CS-1

Read - Take new reading.

______Y:_24.141_fL

______x:_.293

______y:_.279

_Read_______fL/nits

fL/nits - Toggle between foot- Lamberts and nits for units of measure and take new reading.

Error codes: 1, 7 - CS-1 not seeing a usable test image. 5, 8 - Generator did not find a CS-1 probe. 2, 3, 6 - Probe malfunctioning.

Testing Audio

Select Test > Audio to independently toggle stereo audio output channels on and off.

On a 701 generator, the left channel is also the monophonic audio source for the modulated RF output.

Testing HDCP Interfaces

Model 701 video test generators may be equipped with an optional production (private) key for testing High-bandwidth Digital Content Protection (HDCP) interfaces of DVI receivers that support HDCP. For more information about HDCP, see http://www.digital-cp.com/.

To output HDCP-encyrpted video content:

1.Connect the DVI connector of the generator with the DVI connector of the device under test.

14 Model 700, 701 Quick Start Guide