Samsung SHC-730N/P instruction manual Features

Features

FinePicture in Ultra Low illumination.

SV-III built-in DSP and 1/3 high density CCD allows bright and high quality images to be captured in ultra low light condition.

-0.05 Lux in Normal Color Mode

-0.0004 Lux in Sens-Up Mode

Day & Night

The camera provides automatic mode change over by sensing day or night conditions. It can change color mode in the day condition for optimal color and BW mode in night condition for clear identification.

Warning

The camera needs periodic inspection.

Contact an authorized technician for inspection.

Stop using your camera when you find a malfunction.

If you use your camera around smoke or unusual heat for a long time, a fire may be caused.

Wide Dynamic Range(WDR)

SV-III DSP has Strong compensation performance in WDR.

So It always shows obvious, clear and perfect light contrast picture in any environment.

Motion Detection

The camera transmits an alert signal to the MD Output Terminal when it detects motion of an object. If you connect an optional alarm to the camera, you can get the effective surveillance.

Do not Install the camera on a surface that can not support it.

Unless the surface is suitable, it could cause falling or other hazards.

SSNR(Samsung Super Noise Reduction)

SHC-730 has powerful DSP that can remove image noise efficiently and it shows clean and obvious image under low illuminance.

High Resolution

The horizontal resolution of 520TV lines at Color mode and 570TV lines at BW mode can be achieved by using a high density CCD having Double Speed 410,000 pixels SONY CCD, which provides clean, noiseless and reliable pictures.

VIDEO/DC Lens Selectable

The camera accepts 2 types of auto iris lenses (DC type/VIDEO type) and is set with the VIDEO/DC selection switch.

Miscellaneous Function

Privacy, Flip(H/V-REV), D-ZOOM, Burst ON/OFF, SYNC(INT/LL), COLOR, TONE,

SHARPNESS.

Controlled by OSD menu and RS-232C

You can control the camera using OSD menu and RS-232C jack at a remote place.

Do not hold plug with wet hands.

It could cause an electric shock.

Do not disassemble the camera.

It may result in fire, electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in fire or other hazards.

COLOR CCD CAMERA 4 User’s Manual COLOR CCD CAMERA 5 User’s Manual