Samsung SHR-3040 remOte setuP

54_ web viewer
web viewer
remOte setuP
You can confi gure some settings of a remotely connected DVR.
Click <remOte setuP>.
Select <maNual> and provide a value for <aDDress>,
<POrt NumBer>, and <iD> respectively.
Information of the DVR with the fi rst connected address will be
displayed.
The “admin” account alone is enabled to access.
Enter the <PasswOrD> and click <cONNect>.
Your PC will be connected to the DVR remotely.
The network icon on the DVR screen will switch to display the connection status.
Select a desired item from <cONFiGuratiON>, <recOrD> and <eXterNal> in the left.
When done, click <DiscONNect>.
The current DVR will be disconnected.
To return to the Web Viewer screen, click <clOse>.
alarm setup
You can set the alarm input system and duration for the
channel.
Refer to “alarm setuP”. (Page 32)
Buzzer
You can set the use of the buzzer sound during DVR
operation.
Refer to “BuZZer setuP”. (Page 35)
1.
2.
`
`
3.
`
4.
5.
6.
02489A_SHR-3040_ENG.indb 54 2009-11-10 오후 2:14:11