[Setting the jumper]
The jumper setting method is illustrated on the surface of the purchased HDD. Using SAMSUNG hard disk, the jumper setting method is as follows:
■HDD jumper for Primary Master and Primary Slave.
■Jumper setting for Secondary Master and Secondary Slave.
[HDD Addition Procedure]
1. Loosen screws on both sides(5 points) and back(1 point) to detach the product cover.
2.Detach the cover from the product. (Pull out the cover slightly and lift from the back side to detach.)
3.A bracket is fixed to each side of HDD. Please loosen the screw of the bracket to which you want to fix HDD.
