8.The cursor cannot reach Start during Calendar Search.
-Please check both the channel and the date for play are left checked. Both shall be checked for play with Start. The cursor cannot reach the unrecorded date.
9.Alarm, once issued, keeps being issued though you press the front Alarm button for cancellation.
-Press the front Menu button to cancel Alarm as follows.
1)To cancel Event Monitoring Screen : Monitoring - Event Monitoring Duration Off
2)To cancel Buzzer : Event Record - Alarm (Motion Detection/Video Loss) -
3)To cancel Event : Event Record - Alarm (Motion Detection/Video Loss) - State Off.
10.No Response from the Live screen by pushing the PTZ button.
-Press Menu ➝ Camera ➝ PTZ Device to check if the protocol and other items were set to PTZ Camera.
11.When you connect several IEEE1394 armored HDDs to
-It requires time to recognize several armored HDDs. Please try again in a few minutes. If retrial makes no improvement, HDD could be abnormal. Please exchange the HDD.
12.“CLOCK BATTERY HAS FAILED” appears on the screen.
It appears when there is an error in the time settings of the DVR
In addition, it prohibits the DVR operation to prevent loss of the data saved in the HDD.
Please contact the product A/S department and the vendor for examination.
13.You cannot connect to
-Check if 3 Smart Viewer users are in connection with
-Check the Network setup of
-Check Network cable connection.
-When you use DHCP/ADSL(PPPoE) for connection, please check if you get the right
-If
