Camera Operation
COLOR DOME CAMERACOLOR DOME CAMERA User’s ManualUser’s Manual
2726
3. Please press the SETUP button if you wish to return to the previous menu.
• The brightness of the screen can be adjusted within the
range of 1~70. The optimum level of brightness for the
user can be achieved by adjustment.
Notes
3. Please press the SETUP button when all the settings are complete.
SHUTTER (condition and speed control)
Because of using the DC lens, the shutter speed is fixed at 1/60.
1. When the SETUP menu is on the screen, please position the arrow to point
to 'SHUTTER' by using the DOWN button.
2. Please select the shutter mode by pressing the LEFT or RIGHT button.
FLK:Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency.NTSC Model:1/100, PAL
MODEL: 1/120
The screen color can be adjusted by using the WHITE BALANCE function.
1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
WHITE BALANCE control
*Please select one of the 3 modes below.
ATW(Auto Tracking White Balance):This mode can be used within the color
temperature range 1,800°K ~ 10,500°K (Ex. fluorescent light, outdoor, sodium
vapor lamp or inside tunnels)
AWC(Auto White Balance Control):Please press the SETUP button while the
camera is directed at a piece of white paper to obtain the optimum state under
current illumination. If the environment including the light source is changed, you
have to adjust the white balance again.
MANUAL:The manual adjustment mode enables finer adjustment. Please select
ATW or AWC first. Please change to manual adjustment mode and press the SETUP
button. Please set the appropriate color temperature, and then increase or decrease
the red and blue color values while monitoring the color changes on the object.
•Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWC mode.
When the object’s surroundings have a very high color temperature (Ex. a clear sky and sunset)
When the object’s surroundings are dark
If the camera directly faces a fluorescent light or is installed in a place where there are
considerable changes in illumination, the WHITE BALANCE function may become unstable.
Notes
2. Using the SETUP button, you can control the brightness of the screen.