Installation
1. When installing on a adapter plate
2. When installing the camera on a electrical box
An arrow for installing directions
adapter plate 
M4 tapping screw (provided)
Camera body
Unlocking direction
1)Place the bracket provided on the installation surface and fix it with the M4 tapping screws (provided).(Select either 85X85 or 83.5X46)
2)When placing the camera body on the plate, insert the plate pin into the mounting hole on the body as shown in
3)When placing the camera body on the plate, make sure the power and the BNC cables pass through their respective designated holes.(When placing the cable through its side, thread it through the hole at the bottom.)
4)After installation and adjustment of the camera are complete, secure the dome cover by turning it clockwise.
Locking | Plate pin |
direction |
Electrical box
An arrow for installing directions
adapter plate
M4 tapping screw (provided)
Camera 
body 
1)Place the bracket provided on the electrical box where the camera will be installed and fix it with the screws provided.Fix it correctly, depending on the type of
electrical box: 85 X 85 and 83.5X 46
*Screw a bracket to a electrical box till the plate is not modified, otherwise the camera may not be assembled.
2)When placing the camera body on the plate, insert the plate pin into the mounting hole on the body as shown in
3)When placing the camera body on the plate, make sure the power and the BNC cables pass through their respective designated holes.
4)After installation and adjustment of the camera are complete, secure the dome cover by turning it clockwise.
Dome cover
| Locking |
Unlocking | direction |
direction |
|
|
| Plate pin |
| Locking |
|
Unlocking | direction |
|
direction |
| Locking |
|
| |
| Unlocking | direction |
Notes
•Please locate an arrow on bracket for installing direction that you wish to observe Area and then fix it with the M4 tapping screws.
COLOR DOME CAMERA 14 User’s Manual
Dome cover | direction |
COLOR DOME CAMERA 15 User’s Manual
