Choosing a Digital Sound Format (AC3 or PCM)
Both audio and digital sound are available from the rear-panel connectors of the Set-Top
Box. The digital audio output is an optical connector labeled “Dolby Digital Output.”
After connecting the optical digital-audio component, you must specify the transmission for-
mat (PCM or AC-3, as appropriate to your particular equipment).
1Press the MENU button on the remote control.
2Push the I-Point control up or
down to highlight the “Setup”
icon and press ENTER.
Push the I-Point control up or
down to highlight “Sound
Options” and press ENTER.
4Push the I-Point control up or
down to highlight “Dolby Digital
Output”.
5Repeatedly press ENTER until the appropriate format appears
(PCM or AC3).
6Press EXIT.
CHAPTER FOUR
Special Features
4
4
4.4