CHAPTER ONE
Connecting The Set-Top Box
Rear Panel Jacks
1
1
1.2
ŒRF INPUT (75 Ohm)
Connect the antenna here.
´RF THROUGHOUT
Connect a coaxial cable between the antenna throughout
terminal on the set-top box and the antenna terminal on
the TV.
ˇRESOLUTION SELECT
Switches between 1080i (interlaced scanning), 720p
(progressive scanning), 480p (progressive scanning),
and 480i (interlaced scanning) formats. (For HDTV
broadcasts, 1080i is usually the best setting.)
¨DTV OUT SELECT
(Y, PB,PR/ R,G,B FORMAT)
Connect to the Y-PB-PR/RGB digital video input of a digi-
tal-compatible TV set (or the Y-PB-PR/RBG inputs of some
other video component).
ˆDOLBY DIGITAL OUT(fiber optic connector)
Connect this terminal to the digital audio input of a TV
set (i.e., to a TV set that has a fiber-optic connector for
digital audio). Or, connect this terminal to the digital-
audio input of a separate component (i.e., AC3-AMP ...).
ØDTV OUT (R,G,B FORMAT)
Connect to the R, G, B inputs of a TV set, computer moni-
tor, or some other video component.
∏DTV OUT COMPONENT (Y, PB, PRformat)
Connect to the Y-PB-PRdigital video input of a digital-
compatible TV set (or the Y-PB-PRinputs of some other
video component).
”Lt/Rt ANALOG-AUDIO OUTPUTS
Connect these terminals to the analog audio inputs of a
TV set (i.e., to a TV that has jacks for L/R inputs).
Or, connect these terminals to the L/R inputs of a sepa-
rate audio component.
’S-VIDEO OUTPUT
Provides good picture quality. If your TV or monitor has
S-Video capability, use this jack along with the
Audio/Video jacks to connect the Set-Top Box to your
receiver.
˝VIDEO OUT
If your TV or monitor has Audio/Video capability, con-
nect this jack to the AV Input jack on your TV or monitor
using an Audio/Video cable.
ÔDOLBY DIGITAL OUTPUT (Coaxial)
Connect this terminal to the digital audio input of a TV
set.