1.6
CHAPTER ONE
Connecting The Set Top Box
1
1
Connecting the Set-Top Box to a Computer Monitor
1Connect an antenna cable to the RF input
jacks on the Set-Top Box.
2Connect a computer video monitor cable
between the DTV OUT (RGB format) jack
on the Set-Top Box and the VIDEO IN jack on
the computer monitor.
3
Connect an audio cable between the
Lt/Rt AUDIO OUT jacks on the Set-Top
Box and the L/R AUDIO IN jacks on the
computer monitor.
NOTE
You must set “DTV OUT SELECT (YPBPR/RGB,DVI)” for RGB interface.
Connecting Video Component
This section shows how to connect video components, such as a Digital Video Disc (DVD)
player, a VCR without/with a cable box, a VCR using MONITOR OUT, a laser disc
player, or a camcorder to your Set-Top Box.
1Digital Video Disc (DVD) Player
Connect a DVD player to the COMPONENT
VIDEO INPUT jacks on the Set-Top Box.
For further information on video connections,
see the owner’s manual for your DVD player.
2VCR without a Cable Box
Connect a VCR without a cable box to the
Set-Top Box, as shown in the illustration right.
From Antenna
Source
From Cable
Source
AUDIO OUT VIDEO OUT DIGITAL
OPTICAL
Audio OUT
DIGITAL
Audio OUT
LR
MD68-00278A(E)-CHAPTER 1 8/26/02 1:44 PM Page 6