3.7
Setting the Time and Date
First, select the channel that has a Digital Signal.
1Press the MENU button on the remote control.
2Use the Menu Up/Down buttons
to highlight the Setup icon and
press ENTER.
Use the Menu Up/Down buttons
to highlight the Auto Time Setup
icon and press ENTER.
3You will be asked if your local
area observes Daylight Saving
Time. Use the Menu Up/Down
buttons to highlight Yes, or No,
and press ENTER.
4Use the Menu Up/Down/Left/
Right buttons to highlight the
time zone for your local area
(and to move highlight to the
appropriate time zone on the
map of the United States). Press
ENTER.
That’s it. As you have received a digital signal, the time will be
set automatically.
5Press EXIT
CHAPTER THREE
Operation
3
3
MD68-00278A(E)-CHAPTER 3 8/26/02 1:42 PM Page 7