4.17
CHAPTER FOUR
Special Features
4
4

Viewing Information about Channels

1Press the MENU button on the remote control.
2Use the Menu Up/Down buttons to
highlight the Guide icon and press
ENTER.
3Use the Menu Up/Down buttons to
highlight the Full Guide icon and
press ENTER.
4
Use the Green button (STOP) to activate “-2 Hours” and the Yellow
button (PLAY) to activate “+2 Hours”.
5
You may now:
Jump to a channel directly: Use the Menu Up/Down buttons
to highlight the
program
in the Right column and press ENTER.
Obtain additional program details: Highlight the title of a program
using the Menu Up/Down/Left/Right buttons and press the INFO.
button.
Exit from the Program Guide and return to normal viewing mode:
Press Blue button (FF) or the EXIT button.
NOTES
You can also view information about channels by pressing the GUIDE button on the remote control. (The EPG
should be pre-set in Full Guide mode.) There might be a slight difference between the displayed program times
and the real times, depending on the time information is transmitted by broadcasters. If you display EPG after
selecting DTV (1080i, 720p, 480p) with the Resolution Select switch, no video is output through the Video Out
jack or S-Video jack.
When “Search” is activated in Full Guide mode, it may take awhile.
MD68-00278A(E)-CHAPTER 4 8/26/02 2:50 PM Page 17