Samsung SMO-150QN manual DATE/TIME Menu Function setting, Dwell Time Menu function setting, Eng-37

3-2) DATE/TIME MENU Function setting

•Function: Sets the display date format and current time.

•Setting method: Move to #2. DATE/TIME MENU by using ▲/▼ KEY at setup menu, then press the ENTER SWITCH to display the OSD as shown in the below figure below. (The figure shows the initial setting status.)

06/01/03		13:14:00
	DATE/TIME SETTING
	DATE TYPE	MM/DD/YY
	DATE	06 / 01 / 03
	TIME [HH:MM:SS]	13 : 14 : 00

•Setting method of date display format

Move to the item by using ▲/▼ KEY, and press ENTER .

Select a format by using œ / √ KEY and then press the

Enter key to confirm your setting.

(“YY/MM/DD”, “MM/DD/YY”, “DD/MM/YY” are available for selectable data format.)

•Date and current time setting method

Repeat the above instruction for moving to each item (MONTH, DAY, YEAR, HOUR, MINUTE, SECOND) and entering the mode. Current date and time to display can be set. (It can be referred to when ALARM or VIDEO LOSS occurs.)

* Press the œ key to return to the previous Menu.

3-3) DWELL TIME MENU function setting

•Function: Displays each picture for pre-set time and automatically switches it to the next picture in the SEQUENTIAL DISPLAY MODE.

•Setting method: Move to #3. DWELL TIME menu by using ▲/▼ KEY at SETUP MENU, and press the ENTER SWITCH to display the following OSD as shown in the figure below. (The figure shows the initial setting status.)

06/01/03		13:14:00
	DWELL TIME SETTING
	CAM1	03 SEC
	CAM2	03 SEC
	CAM3	03 SEC
	CAM4	03 SEC
	CAM5	03 SEC
	CAM6	03 SEC
	CAM7	03 SEC
	CAM8	03 SEC
	QUAD-A	03 SEC
	QUAD-B	03 SEC

Eng-37