using with a Windows computer
USING THE Intelli-studio Programme
Using the
1. Set the menu setting to "PC Software: On." page 81 |
• You will find the default menu settings are set as above. |
STBY 0:00:00 [475Min]
2. Connect the camcorder and the PC with the USB cable. |
Settings
PC Software
Off
• A new file saving screen appears with the |
window. |
• According to your computer type, the corresponding removable |
disk window appears. |
3. Click "Yes", the uploading procedure will start. Click "Yes" to confirm. |
• If you do not want to save a new file, select "No." |
TV Display On
Default Set
Exit Move Select
After completing the data transfer, make sure to disconnect the cable in the following way:
1.Click on the “Safely Remove Hardware icon” icon on the taskbar.2.Select “USB Mass Storage Device”, and then click “Stop.”3.If the “Stop a Hardware device” window appears, click “OK.”4.Disconnect the USB cable from the camcorder and PC.
|
|
| • Use the provided USB cable. (Supplied by Samsung) |
|
|
| • Don’t apply excessive force when inserting or extracting the USB cable into/from a USB jack. |
|
|
| |
|
|
| • Insert the USB after checking the correct direction of its insertion. |
|
|
| • We recommend using the AC power adaptor as power supply instead of the battery pack. |
|
|
| • When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction. |
|
|
| • If you disconnect the USB cable from the PC or the camcorder while transferring data, the data |
|
|
| transfer will stop and the data may be damaged. |
|
|
| • If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable |
|
|
| along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB |
|
|
| devices from the PC and reconnect the camcorder. |
|
|
| • According to your computer type, the |
86 |
|
| case, open the desired |
|
| run iStudio.exe. | |
|
|
|
|