Recording
Symptom |
| Explanation/Solution | |
When recording a subject |
|
| |
illuminated by bright light, vertical | • | The camcorder is unable to record these levels of brightness. | |
lines appear. |
|
| |
|
|
| |
When the screen is exposed to |
|
| |
direct sunlight during recording, | • | Do not leave the camcorder with the LCD screen exposed to | |
the screen turns red or black for an |
| direct sunlight. | |
instant. |
|
| |
|
| ||
| • Set the "Beep Sound" to "On." | ||
The beep sound is not heard. | • The beep sound is temporally off while recording videos. | ||
• When the Audio/Video cable jack is connected to the camcorder, | |||
| |||
|
| the beep sound will automatically turn off. | |
There is a time difference between | • On your camcorder, there may be a slight time delay between | ||
the point where you press | |||
| the point when you press Recording start/stop button and the | ||
Recording start/stop button and |
| ||
| actual point where the recorded video starts/stops. This is not an | ||
the point where the recorded video |
| ||
| error. | ||
starts/stops. |
| ||
|
| ||
|
| ||
| • The internal temperature of your camcorder is unusually high. | ||
The recording stops. |
| Turn off your camcorder and leave it for a while in a cool place. | |
• Your camcorder is damp and moist inside (condensation). Turn | |||
| |||
|
| off your camcorder and leave it for about 1 hour in a cool place. | |
| • Set your camcorder to Record mode. ²page 19 | ||
| • Release the lock on the | ||
You cannot record a photo image. |
| any. | |
• | The storage media is full. | ||
| |||
|
| Use a new memory card or format the storage media. ²page 73 | |
|
| Or remove unnecessary images. ²page 60 | |
Adjusting the image during recording
Symptom | Explanation/Solution |
|
| |
| • Set "Focus" to "Auto." ²page 51 |
|
| |
| • The recording conditions are not suitable for auto focus. |
| ||
Focus does not adjust | Adjust the focus manually. ²page 51 |
| ||
automatically. | • The lens is dusty on the surface. Clear the lens and check the focus. |
| ||
| • Recording is being made in a dark place. Increase the brightness |
| ||
| in the place. |
|
| |
The image appears too bright or | • This occurs when recording images under a fluorescent lamp, |
| ||
sodium lamp, or mercury lamp. Cancel "iSCENE" to minimise |
| |||
flickering, or changes in colour. | 105 | |||
these phenomena. ²page 45 | ||||
| ||||
|
|
|
| |
